Release time: 2022-03-21

PLFE flange output gearbox is used in industries that do not require very high accuracy, but requires high rigidity, such as vertical direction. Under normal circumstances, considering the insufficient rigidity of the shaft, flange-type gearbox is general

Release time: 2022-03-21

The difference between the PLHE planetary gearbox and the economical type is that it is economical and the precision is greatly improved. The plhe adopts stainless steel for the outer casing, and the output shaft is the same as the N series pln, using all

Release time: 2022-03-19

NEUGART series PLPE planetary gearbox has the characteristics of economical gearbox, and also has its own improvement on this basis. Because it is equipped with large-sized deep groove ball bearings, it has high axial force and radial force, and does not

Release time: 2022-03-18

Planetary gearboxs often encounter some problems in their work, such as the problem that the gearbox breaks soon after running. Today, I will take you to understand what causes the output shaft of the gearbox to break. I hope it can help you. . 1.

Release time: 2022-03-17

It is very right that the industries that use planetary gearboxs often encounter some problems in their work, such as the output shaft does not rotate, the gearbox shaft is broken, etc. So how did these problems arise? These have a lot to do with the appl

Release time: 2022-03-16

There are many application industries for racks. STRRONSE racks are widely used in laser cutting machines, gantry trusses, etc. These require high precision for racks. Racks have two main processes: quenching and tempering and quenching. What are the char

Release time: 2022-03-16

Optional function modes of the torque limiter synchronous standard form After removing the overload, the steel ball will re-engage accurately 360 degrees in the original direction. The position of the synchronous axis i

Release time: 2022-03-15

Gear racks are widely used in laser cutting machines, and laser cutting machines have relatively high precision requirements for racks. There are also many rack manufacturers in the market, with different manufacturing levels. How to choose a laser cuttin

Release time: 2022-03-15

Torque limiter, also known as safety coupling, is generally used for the connection between the power output side and the load side. Generally, a disconnected torque value is set according to the actual production needs. Once the torque is overloaded, the

Release time: 2022-03-14

R+W's BK5 Bellows Couplings are ideal for use in complex, hard-to-reach assembly environments and feature a two-piece pluggable design. This eliminates the need to drill tedious access holes in the housing and rotate the coupling into proper alignment

Release time: 2022-03-14

Planetary gearbox gear gearboxs often suffer from wear or oil leakage during long-term work. How to solve these problems, or prevent these problems from happening, then I will introduce you to the faults and troubleshooting of planetary gear gearboxs rela

Release time: 2022-03-14

The maintenance of the gearbox is the key way to increase its service life. The maintenance of the common high-precision planetary gearbox is about grease. The grease of the gear should be maintained frequently (except for the natural large planetary gear